VICTOR 9000 Wireless Electric Power Tester Hook Type Ampere Current Meter
VICTOR 9000C/9000D Wireless High-Low Voltage Hook Type Ampere Current Meter With Large-Aperture Hook Wireless Receiver And Extensible
Instruction
VICTOR 9000 wireless high-low voltage hook amperemeter consists of large-aperture hook instrument, wireless receiver and extensible insulation rod. The iron core of hook instrument is made by new materials: portable, high-precision, wide measurement range and good linearity. When the instrument is connected to extensible insulation rod, it can test the leakage current, current, frequency and load of bare conductor or bus rod under 35kV, or cable with safe insulation sheath under 110kV. Besides, it is especially suitable for electricity leakage patrol inspection and transformer load detection of downhole and outdoor multi-conductor thick cable.
The straight wireless data reception distance is 150m, and the current measurement can be selected between AC 0～6000A and 0～20000A, the maximum outer diameter of conductor or cable which it can measure is 168mm, and the maximum size of the busbar which it can measure is 168mm×245mm.
Hook instrument can be hanged onto the line to carry out tests, which saves the physical efforts of operators. The receiver adopts 3.5-inch True Color LCD, which provides intuitive and clear image interface display. The insulation rod is portable and characteristic of moisture resistance, high-temperature resistance, impact resistance, high insulation and extensibility. In addition, the instrument can maintain and store the data. Thus, it is widely applied in current detection and outdoor electrician operations in substations, power generation plants, industrial and mining enterprises, detection stations and electrician repair departments.
| Type |
Current measurement range |
Remark |
| VICTOR 9000C |
AC 0～6000A |
/ |
| VICTOR 9000D |
AC 0～20.0kA |
Wider current measurement range |
Technical specification
| Function |
High-low voltage AC leakage current, current and frequency test; iron core grounding current and transformer load test; electricity leakage patrol inspection of downhole and outdoor multi-conductor think cable |
| Power source |
DC 3.7V chargeable lithium battery, USB charging portal, working continuously for 10h |
| Testing method |
Hook CT, which can be hanged onto the line for testing |
| Transmission method |
433MHz wireless transmission |
| Transmission distance |
Straight transmission distance about 150m |
| Display mode |
3.5-inch True Color LCD display, press upper and lower arrow button to adjust the backlight luminance |
| Tested line diameter |
Ф168mm Conductor or cable, or 168mm×245mm bus bar |
| Tested line diameter |
Ф168mm Conductor or cable, or 168mm×245mm bus bar |
| Measurement range |
Current: AC 0～6000A or AC 0～20.0kA (50/60Hz automatic) |
| |
Frequency: 45Hz～75Hz |
| Resolution |
10mA；0.1Hz |
|
Current precision
(23℃±5℃,below 80%RH)
|
0.00A～99.9A: ±2%±5dgt |
| |
100A～6000A: ±3%±5dgt |
| |
6.00kA～20.0kA: ±4%±5dgt |
| Frequency precision |
±1Hz |
| Gear shift |
Automatic gear shifting |
| Size of insulation rod |
About 5m long after extended; about 1m long after drawn back (5 nodes) |
| Data storage |
9999 sets |
| Sample frequency |
2 times/s |
| Instrument size |
Hook instrument: length width thickness 310mm×270mm×52mm
Receiver: length width thickness 250mm×100mm×40mm
|
| Line voltage |
Test bare conductor under 35kV, cable with safe insulation sheath under 110kV (operate with insulation rod) |
| Data maintenance |
Press HOLD button under testing mode to maintain the data, and then press HOLD button again to cancel the maintenance |
| Press HOLD button under testing mode to maintain the data, and then press HOLD button again to cancel the maintenance |
| Press ESC button to exit from current interface and return to the upper directory |
| No position error in Area A; about 0.2% increase in Area B; about 2% increase in Are C |
| After entering data reference mode, press arrow button to refer to all the stored data |
| Current measurement range overflow function: displayed by “OL” symbol |
| When the receiver does not receive the transmission signal, it dynamically displays “----” symbol |
| About 15mins after startup, the instrument will be automatically shut down to reduce battery consumption |
| When the battery voltage is lower than 3.2V, the low battery voltage symbol will be displayed to promote charging the battery |
|
Hook instrument: 496g(including battery)
Receiver: 395g(including battery)
Insulation rod: 1.45kg
Total weight: 11.5kg(including instrument box)
|
| -10℃～40℃; below 80%Rh |
| -10℃～60℃; below 70%R |
| Storage humidity and temperature |
-10℃～60℃; below 70%R |
| Interference |
No interference from other 433MHz signals |
| Insulation intensity |
Insulation rod: AC 110kV/rms(between both ends after 5 nodes of insulation rod are totally extended)
Hook instrument: 2000V/rms(between the connector of insulation rod and the top end of hook instrument)
Receiver: 2000V/rms(before the front and back end of outer shell)
|
| Structure |
Anti-dripping Type II |
Product Tags:
|
|
VICTOR 9000 Wireless Electric Power Tester Hook Type Ampere Current Meter Images
|
